Наш сайт использует cookie-файлы, данные об IP-адресе и вашем местоположении для того, чтобы сделать сайт максимально удобным для Вас. Если Вы продолжите пользоваться нашими услугами, мы будем считать, что Вы согласны с использованием cookie-файлов. Политика конфиденциальности

Τηλέφωνο Επικοινωνίας:

Εργοστάσιο παραγωγής βιοκαυσίμων μπρικετών - 0,5 t/hour

Εργοστάσιο παραγωγής βιοκαυσίμων μπρικετών - 0,5 t/hour

Factory capacity 0,5 t/hour on manufacture of fuel briquettes of briquettes from a damp small wood waste (chips, shavings, sawdust), peat and a damp agricultural waste. The raw materials are brought up by motor transport (or a loader) and “the mobile floor” (1) is poured on the mechanised warehouse. Stokers of a mobile floor have a hydraulic drive and under its action make back and forth motions. Shovels ("wings") of stokers have the wedge-shaped form, therefore at movement of stokers the raw materials with adjustable speed of giving go to the chain (scraper) conveyor (2), further the raw materials move on a disk separator (3). On it from raw materials separates stones, radical, etc. to impurity which get to the portable container (on the scheme it is not shown), and the raw materials through gravity flow get to loading section of the Unit of Drying-crushing (4). Products of burning from heat the generator (5) Here move (more in detail) and cold atmospheric air through under abnormal condition-rastopochnuju pipe (6) (into the given complete set does not enter) is sucked in. Originally products of burning and cold air mix up, the mixing proportion is regulated automatically that provides maintenance of the set temperature of the heat-carrier. Then the heat-carrier mixes up with damp raw materials and is sucked in in the Unit of Drying-crushing (4). In it the raw materials are crushed and then dried up, rising in a heat-carrier stream to the dynamic qualifier which is in head section of the Unit of Drying-crushing. The dynamic qualifier, which frequency is set from a control panel (15), passes small and dry raw materials, and large and damp particles of raw materials returns to the Unit rotor, this process repeats before reception of necessary humidity and degree of crushing of raw materials (more in detail). The crushed and dried up raw materials (from this point on it is accepted to name it a flour) are sucked in in a sedimentary cyclone (8) for the account exhaustion, created induced-draft fan. In a cyclone the flour is besieged at the expense of centrifugal force and moves downwards, and the fulfilled heat-carrier is thrown out in a chimney (16) (into the given complete set does not enter). From a cyclone the flour through a lock shutter moves in screw or the chain conveyor (9), arrives further in the bunker briquette the press (10). In the bunker there is a device interfering caking of a flour. From the bunker the flour screw a feeder with adjustable speed of giving goes in briquette a press (11). In a press the flour at first gets to chambers of the preliminary pressing, whence two cup-up directed screw in the pressing chamber. In the chamber of pressing the flour is pressed by the mobile piston (percussion cap) into a conic motionless matrix where under the influence of the big pressure there is a formation of a continuous briquette (further for simplicity – "briquettes"). The briquettes leaving a press, have high temperature and are fragile, therefore they go to a tunnel cooler of briquettes (12). In the course of cooling humidity of briquettes decreases at the expense of moisture evaporation, and in them there are physical and chemical changes. As a result they get necessary hardness, humidity and temperature. Moving ahead on the tunnel of a cooler which in this case is simultaneously and the conveyor, the continuous briquette arrives through metallo-detector (13) in an automatic saw (14) where there is its cutting on briquettes of the set length. Further briquettes arrive on a site of packing and finished goods warehouse (are not shown).
Heat the generator in the given complete set it can be loaded by fuel as in manual (through a door), and in an automatic mode - from the bunker of fuel (7). Replenishment of the bunker of fuel is made manually or system of automatic filling of the bunker of fuel (17). Optional the fuel bunker can replenish with the additional conveyor from a warehouse of raw materials or a separate warehouse of fuel (are not shown).

Ελάχιστη Τιμή
51 000 euro
Βασική Τιμή
151 000 euro
Βέλτιστη Τιμή
182 500 euro
Μέγιστη Τιμή
196 000 euro
* Στην τιμή δεν περιλαμβάνεται Φ.Π.Α.
Τεχνικά Χαρακτηριστικά
Παράμετρος Τιμή Παραμέτρου
Γενικές διαστάσεις  
Μήκος, m 36,5
Πλάτος, m 20,5
Ύψος, m 8,7
Ηλεκτρική ισχύς  
Ηλεκτρική ισχύς, kW 120
Διαστάσεις στεγασμένου εξοπλισμού  
Μήκος, m 28,5
Πλάτος, m 15,0
Ύψος, m 6,0
ΕΡΓΑ  : Εργοστάσιο παραγωγής βιοκαυσίμων μπρικετών - 0,5 t/hour
Τηλέφωνο Επικοινωνίας
Πνευματική Ιδιοκτησία 2011-Όλα τα δικαιώματα διατηρούνται