Hammer mill. The hammer crusher is intended for secondary crushing of raw and its preparation for a granulation or briquetting. The raw submitted in hammer crusher is previously cut to certain fraction or undertakes from industrial wastes that promotes reduction of raw to small fractions to a substance. The fraction of particles received at crushing can be finished to the sizes of a wood flour passage through which sieve of an aperture constitutes 0,450 – 0,250 – 0,160 mm.
Process of crushing of raw in a crusher occurs by means of blow of hammers. Hammers are established on axes. The working backlash between them is regulated distance sleeve. Axes are fixed in disks. Disks fasten on a shaft. Disks, a shaft, an axis, hammers and distance sleeve constitute working body of a crusher - a rotor. For the control of a thickness of a grinding in a crusher are established a sieve which fasten by means of frames of fixture of a sieve. Lateral covers are intended for convenience of change of a sieve, hammers. In a loading mouth the regulator of a direction of giving of raw is established. On the case it is established impact deck. A deck it is located in such a manner that promotes a turbulence of the air flow formed as a result of rotation of a rotor that improves efficiency of crushing and increases a serviceable life of hammers and decks. The rotor is set in motion by the electric motor. The twisting moment from the engine to a rotor is transferred by means of an elastic muff.
On a sieve with diameter of apertures 3 mm are reached crushing of a product to the second group size. Under the additional order of the buyer the crusher can be completed with a lock feeder.
Productivity depends on a kind of a crushed product, capacity of the electric motor, diameter of apertures of a sieve, accomplishment of requirements on aspiration, uniformity of giving of a product and its distribution on an entrance branch pipe.
The crusher serviceable life at three-shift work to a wear-out constitutes not less than 12 years, under condition of observance of all rates and prescriptions factory the manufacturer. At use of an item more than the specified term the manufacturer of responsibility for it doesn't bear. Quickly-worn out details and knots are acquired by the consumer in process of their depreciation irrespective of useful life.
Crusher servicing should is produced by the specialists who have studied its device, the action and service regulation principle, passed instructing in safety arrangements, fire safety, and also medical inspection.
The molotkovaja crusher conforms to requirements of specifications THAT 38 31-001-53462255-07, the documentation complete set according to the item specification, requirements of GOST 18098-89, GOST 26582-85Е
Ελάχιστη Τιμή
27 450 euro
All production of “SPiKo” – from separate element up to complex ready-to-operate factories (including services of projecting, assembling, testing and start-up) – can be bought on lease.
What are the advantages of lease? It provides the enterprise with additional opportunities of access to modern and efficient technologies, increase in volumes and profitability of production, increase in quality of the production. That is why today lease in one of the most popular financial instrument for creation of new productions and modernization of the existing ones.
Comparing to other methods of buying equipment at the expense of attracted finance leasing possesses several big advantages and only few disadvantages.
Advantages of leasing
1. Opportunity to receive financing in the volume increasing value of a business because mortgaging security in leasing transactions is the object of leasing itself.
2. Buying equipment on lease does not change balance of own and borrowed finance that lets the enterprise receive bank credits at the same time with buying equipment on lease.
3. Buying equipment on lease let the enterprise cut expenses for taxation because:
3.1 Leasing payments in full volume are to be counted together with production prime cost thus they reduce taxable base and as a result reduce tax on profit.
3.2 VAD taken from leasing payments can be reckoned.
3.3 Due to buying equipment on lease its depreciation is considered accelerated thus tax on property is significantly decreased. In case if during the time of leasing contract the equipment is shown at the balance sheet of the Lessor, the Lessee has not to pay tax on property for the property bought in this period in accordance with this contract.
Disadvantages of leasing:
1. Necessity of advanced payment (20 or 30% dependent on the cost of equipment)
2. Necessity (as in our case) to sign trilateral contract that needs much more time to be adopted by all parties than bilateral one.
It is evident that these disadvantages do not overlap the advantages of leasing.
Main terminology:
Leasing (or financial rent) – it is long term rent of equipment with following buying-out (right to buy-out) by the lessee.
Object of leasing – in our case – separate elements or complex factories for producing wood pellets, briquettes, wood flour, granulated meal, wood particles etc.
Leasing contract – is the contract in accordance with which the Lessor (the Buyer) is obliged to buy the equipment specified by the Lessee from special Seller (in this case from “SPiKo, Ltd.”) or our official representative and provide due payment for timely possession of equipment with its following buying-out.
Main types of buying equipment on lease:
1. To present a number of documents for us to be sure in your financial opportunities.
2. To receive adoption of leasing company
3. To sign the leasing contract (and relevant documents if necessary)
4. Lessee has to pay in advance to the Lessor.
5. The Lessor has to pay for the equipment to the Seller.
6. To produce the equipment and transfer it to the Lessee.
7. The Lessee has to make leasing payments in favor of the Lessor.
8. To transfer the equipment to the property of the Lessee.
Main terms of receiving a lease:
1. The Lessee has to posses sufficient volume of profit necessary to supply leasing payments or to have a guarantee of an enterprise satisfying this demand.
2. Equipment bought on lease has to be highly liquid. It can be equipment with good recommendations produced by a trustworthy producer and possessing all necessary certificates. Our equipment satisfies these demands and this let us to sell already 3 factories on lease (including foreign buyers).
3. The Lessor has to be the resident of the same country as the Lessee.
Our assistance in receiving the lease:
1. Recommendations of leasing companies that cooperate actively with our company.
2. Decrease of advance payment received by our company from the leasing company.
3. Providing of services on pre-project preparation of created production and its start-up that decreases the risks both of the Lessor and the Lessee.
* Στην τιμή δεν περιλαμβάνεται Φ.Π.Α.
Τεχνικά Χαρακτηριστικά
| Παράμετρος |
Τιμή Παραμέτρου |
| Γενικές διαστάσεις |
|
| Μήκος, m |
1,58 |
| Πλάτος, m |
1,43 |
| Ύψος, m |
1,69 |
| Ηλεκτρική ισχύς |
|
| Ηλεκτρική ισχύς, kW |
55 |
| Βάρος |
|
| Βάρος, kg |
1 845 |
|
