Наш сайт использует cookie-файлы, данные об IP-адресе и вашем местоположении для того, чтобы сделать сайт максимально удобным для Вас. Если Вы продолжите пользоваться нашими услугами, мы будем считать, что Вы согласны с использованием cookie-файлов. Политика конфиденциальности

Screw conveyor 1 ... 4 t/h

Screw conveyor 1 ... 4 t/h

Conveyor screw (spiral conveyor, screw conveyor, screw conveyor is designed for transportation of the following raw materials: dry wood waste (wood chips, sawdust, shavings), the bulk of agricultural wastes (husk, husk, dry dung, manure, etc.), bulk waste промпереработки (dehydrated alcohol bards, beer дробины, beet pulp), milled peat, sapropel and lignin, etc. At reprocessing plants biomass pellet production and (or) briquettes is usually used for transportation of raw material from mechanized warehouse to a drying equipment-grinding, further - to the line of bale (granulation and briquetting) or the production of wood-plastic composites and other products.

Screw conveyor consists of a case, screw, bearing units and drive. The housing has the shape of a cylinder and gutters. Inside the body of the bearing supports of set screw (screw). Screw made of solid steel strip rolled into a spiral on the special technology. To protect bearing units from the ingress of particles of the material, shaft screw has a special seals. For even greater reliability of bearing units can be mounted on the hull of a conveyor belt through a spacer sleeves prevent leakage of the transported material inside the bearings. Possible regulation of frequency of rotation of the screw, hence, the productivity of the auger. Capacity of the motor-reducer is chosen depending on the size of the screw, and the characteristics of transported material and performance requirements. Housing screw made of sheet metal and consists of sections. On a body, made in the form of a chute, on all length there are ribs and a solid frame, to increase strength and to avoid deformation of the casing. The carrier is made for operation in the lower temperature of ambient air - minus 10 C, the high value - plus 40 degrees.

Advantages of screw conveyors of manufacture «SP-Co»:
1. The minimum friction and, therefore, energy consumption at the expense of use in the manufacture of screw solid (цельнотянутой) steel strip (high accuracy of geometrical sizes and the absence of joints between the screw, causing a lot of resistance of the material).
2. The simplicity of the design.
3. The ease of operation and maintenance.
4. Minimum dust.
5. Relatively low price.

Options: sensor pressure, противовиток in the zone of unloading of the transported product, supports the viewing window.

Minimum price
11 500 euro
* price without VAT
PARAMETR NAME VALUE
The general dimensions  
Length, m 3,40
Width, m 0,26
Height, m 0,36
Weight  
Weight, kg 150
OUR PORTFOLIO  : Screw conveyor 1 ... 4 t/h
Contact number
© 2011 All rights reserved.

Site development :
Slipchenko P.P.
АИР Coffeestudio