Наш сайт использует cookie-файлы, данные об IP-адресе и вашем местоположении для того, чтобы сделать сайт максимально удобным для Вас. Если Вы продолжите пользоваться нашими услугами, мы будем считать, что Вы согласны с использованием cookie-файлов. Политика конфиденциальности

Complex of the equipment for manufacture of a wood flour 0,5 t/hour - "Maxi"

Complex of the equipment for manufacture of a wood flour 0,5 t/hour - "Maxi"

Set of equipment for production of wood flour with the capacity 0,5 t/h of wet shredded wood waste, sawdust, shavings, wood chips and unbusinesslike wood: balance sheets, slab, facing, etc. Power specified in the initial relative humidity of wood waste 50% and end - 5%. Final humidity and the degree of comminution is set by the operator from the control Unit of the speakers in the real-time mode.
A raw material is transported by motor vehicles (or loader) and pours out of the mechanized warehouse of “the moveable floor” (1). Stoker of “the mobile floor” have an hydraulic drive and under his influence commit reciprocating motion. The scapula (“wings”) of stoker have a wedge-shaped side, so when stoker is moving, a raw materials with adjustable feed speed is supplied on a chain (scraper) conveyer (2), then the raw material is fed to the disk separator (3). On it from raw material is separated stones, roots and the big particles, which are in a portable container (not shown on the scheme), and raw materials through the mercy of fate gets in the boot section of the Unit Drying and grinding (4). Here also supply the products of combustion of a heat generator (5) and ingest cold air through the emergency-ignition tube (6) (in the complete set is not included). Originally mixed combustion products and cold air mixing ratio is adjusted automatically, which ensures the maintenance of specified temperature of the heat-carrier. Then heat-transfer agent is mixed with wet raw materials and fed into the Unit Drying and grinding (4). In it the raw material is crushed and then dried, rising in the flow of coolant to the dynamic classification, which is in the head section of the Unit Drying and grinding. Dynamic classifier, the frequency of which is set from the control panel (12), allows fine and dry raw materials, and large and liquid particles of raw materials returns to the rotor of the Machine, the process is repeated to obtain the necessary humidity and the degree of grinding of raw materials. Crushed and dried raw materials (at this point it is called flour) goes into sedimentary cyclone (7) at the expense of rarefaction created by smoke exhauster (8). In the cyclone flour is deposited at the expense of centrifugal forces and moves downward, and the exhaust heat is emitted in the chimney (11) (in the complete set is not included). From the cyclone flour through a rotary shutter is served in the auger or chain conveyor (9), then goes into the bin (10), of which goes for further processing, for example - on the production of wood-plastic composites.

Minimum price
408 900 euro
* price without VAT
PARAMETR NAME VALUE
The general dimensions  
Length, m 30,0
Width, m 20,5
Height, m 8,7
Electric capacity  
Electric capacity, kW 245
Dimensions indoors  
Length, m 22,0
Width, m 15,0
Height, m 6,0
Weight  
Weight, kg 25 275
OUR PORTFOLIO  
Contact number
© 2011 All rights reserved.

Site development :
Slipchenko P.P.
АИР Coffeestudio